|
ELECTRIC vs. HYDRAULIC
| Q: |
What are the benefits of having an all-electric 12 Volt DC powered rescue tool? |
| A: |
To name a few...
- No hazardous hydraulic fluids
- No high pressure hydraulic lines
- No hazardous gasoline and engine fumes
- Lightweight and portable system
- Quiet operation
- Safe for indoor & outdoor use
- No special stowage requirements
- Back-up 12 Volts DC readily available
|
| Q: |
How do Power Hawk P-16 Rescue Tool spreading forces compare with similar class
hydraulic rescue tools? |
| A: |
Using advanced aerospace actuation technology, the Power Hawk P-16 Rescue Tool deliversspreading forces that are GREATER than similar class hydraulic rescue tools! Many hydraulic rescue tool manufacturers advertise their spreading force at the full open position, where the arms no longer move apart and the force is unusable. In arm positions other than full open,some tools only achieve forces that are less than HALF the advertised spreading force.
|
| Q: |
How much spreading force does the P-16 Tool have? |
| A: |
Lots! Look under Rescue Tool Spreaders & Straight-blade for specifications on spreadingforces. A third party testing laboratory has witnessed and verified spreader forces.
|
| Q: |
Does the P-16 Rescue Tool have crushing as well as spreading capability? |
| A: |
Yes. The P-16 Rescue Tool generates high output forces in both opening and closing directions.Crushing can be accomplished using the S-1601 spreader arms.
|
| Q: |
How much cutting force does the P-16 Tool have? |
| A: |
Lots! Look under P-16 Rescue Tool Cutters & Straight-blade for specifications on cutting forces.
|
DESIGN
| Q: |
Why is the rear handle on the P- 16 Tool round? |
| A: |
The operating trigger switch located at the rear of the P-16 Tool is a rotary type. The round rear handle which surrounds and protects this switch enables identical, easy finger operation while using gloves, regardless of the tool's rotational position. With this arrangement, little thought is needed for the operator to remember which direction the attachments will move when the trigger is depressed...
Left (CCW) - opens... Right (CW) - closes.
|
| Q: |
What is the benefit of the variable 70° swing of the P-16 gearbox and attachments? |
| A: |
The unique variable 70° swing feature of the P-16 Rescue Tool offers tremendous versatility in extrication operations. Both the spreader and cutters can operate "around corners" without any loss in force. Car door hinges are easily accessed from the inside without getting in the way of the patient.
|
APPLICATIONS
| Q: |
Can the Power Hawk P-16 Rescue System be used indoors? |
| A: |
Yes! There are no hydraulics or gasoline engines to worry about. Because the Power Hawk system is powered solely by 12 Volts DC, it is ideal for indoor applications and confined spaces.
|
| Q: |
Can the Power Hawk Rescue System be used in the rain? |
| A: |
Definitely! Rain or hose spray will not affect tool operation. The Power Hawk was third-party tested to IEC 529 and achieved the highest water jet test. It is recommended, however, that wet equipment be wiped off prior to storage to prevent corrosion.
|
| Q: |
Can the Power Hawk Rescue System be used underwater? |
| A: |
The P-16 Rescue Tool is not intended for use underwater. Should the tool be subjected to underwater use in the event of an emergency, however, it will require thorough drying out and re-lubrication to prevent internal corrosion. This service should be performed by an Authorized Power Hawk Service Center or the Factory.
|
| Q: |
Is the Power Hawk P-16 Rescue System "intrinsically safe" or explosion proof? |
| A: |
No. NEVER use the P-16 rescue System in an explosive environment. Remember that with any rescue tool where metal spreaders or cutters are working against metal parts, there is the risk of heat sparks.
|
ELECTRICAL
| Q: |
How much electrical amperage is drawn by the P-16 Tool motor? |
| A: |
The 12 Volts DC motor in the P- 16 Tool draws approximately 15 amps when operating under no-load. Increase in current draw is proportional to the increase in load on the tool (spreading, cutting, etc.), up to a maximum of 150 amps (+/-5 amps), at which point the tool automatically shuts off. A split-second inrush current occurs each time the motor is turned on, which peaks at approximately 200 amps.
|
| Q: |
What is the difference between the red and yellow connectors used with the
Power Hawk Rescue System? |
| A: |
The red connectors deliver 12 Volts DC from a power source to the PC-100 Controller Unit or other accessories such as a flood light. The yellow connectors deliver power from the PC-100 to the P-16 Rescue Tool. The red and yellow connectors are configured differently so that they cannot be connected together.
|
PWR3X12 POWER PACK
| Q: |
What type of battery is used in the Power Hawk PWR3X123 Power Pack? |
| A: |
A 33 amp-hour 12 Volts DC valve-regulated lead-acid rechargeable battery is used in the PWR3x12 Power Pack. Unlike conventional liquid lead-acid batteries, this type of battery will not spill acid, which is important for safe portability and use.
|
| Q: |
How long will the battery in the PWR3X12 last during P-16 Tool operation? |
| A: |
Battery energy is consumed only when the tool's trigger switch is operated. Therefore, the more proficient the operator is, the longer the operational time of the tool. Field experience has shown that on average 8 to 10 car doors and two roofs can be completely removed on one battery charge.
|
| Q: |
What happens if the internal battery in the PWR3X12 becomes fully discharged while on an extrication scene? |
| A: |
Providing back-up power to the P-16 Rescue Tool can be as simple as using the 16 ft. jumper cables or vehicle harness kit to hook the PC-100 Controller Unit to any other (charged) 12 Volts DC automobile battery. Having spare PWR3x12 Power Packs on the scene is strongly recommended for quick replenishment of power during extended operations.
|
| Q: |
How long does it take to recharge the PWR3X12? |
| A: |
Recharging of the PWR3X123 must only be done using Power Hawk chargers, such as Model BCU1. A fully discharged battery could take up to 15 hours to become fully recharged. A partially discharged battery will take less time.
|
| Q: |
Why is the PWR3X12 Power Pack vented? |
| A: |
The PWR3X12 Power Pack is vented to allow any hydrogen gas exhausted by the internal battery to safely diffuse out of the carrying case without dangerous buildups.
|
| Q: |
Does the battery in the PWR3X12 have a "memory"? |
| A: |
No. Lead-acid batteries do not have a "memory", a phenomenon commonly associated with nickel-cadmium batteries.
|
MAINTENANCE, SERVICE & WARRANTY
| Q: |
What maintenance is required for the Power Hawk P-16 Rescue System? |
| A: |
The Power Hawk P-16 Rescue System requires minimal maintenance. Primary recommended routine maintenance includes maintaining adequate battery charge, keeping the equipment clean and rust free.
|
| Q: |
Who provides service for the Power Hawk? |
| A: |
Power Hawk Rescue System service is provided by your local Authorized Power Hawk Service Center or the Factory.
|
| Q: |
What warranty comes with the Power Hawk P-16 Rescue System? |
| A: |
The Power Hawk P-16 Rescue System comes with a limited LIFETIME Warranty.
See WARRANTY information for more details.
|
|
|
