| P-16 RESCUE TOOL | ||
| Gearbox Output Torque: | 72,000 lbs.- in. (8134 N-m) | |
| Output/Input Ratio: | 5,958:1 | |
| Gearbox Articulation Angle: | 70° | |
| Attachment Pins: | High-strength steel, ball detent | |
| Motor Type: | 12 Volts DC | |
| Motor Inrush Current: | 220 amps | |
| Motor Current @ No Load: | 15 amps | |
| Motor Current @ Max. Load: | 150 amps | |
| Pigtail Cable Length: | 1.0 ft. (.30 m) | |
| Without Attachments: | ||
| Weight: | 32 lbs. (14,5 kg.) | |
| Envelope (L x W x H): | 17” x 10” x 12” (43.2 x 25.4 x 30.5 cm3) | |
| With S-1601 Spreaders Attached: | ||
| Spreading Force: | 8,000 to 11,000 lbs. (35.6 - 48.9 kN) |
|
| Note: All forces calculated 1” from tip | ||
| Weight: | 40 lbs. (18.2 kg.) | |
| Envelope (L x W x H): | 25” x 10” x 12” (63.5 x 25.4 x 30.5 cm3) |
|
| Opening Distance: | 14” (35.6 cm) | |
| With C-1601 Cutter Attached: | ||
| Cutting Force: | 30,000 + lbs. (133.4 kN) at blade center |
|
| Weight: | 43 lbs. (19.5 kg.) | |
| Envelope (L x W x H): | 24” x 10” x 12” (61 x 25.4 x 30.5 cm3) |
|
| Opening Distance: | 5” (12.7 cm) | |
| With CS-1602 Cutter Attached: | ||
| Cutting Force: | 45,000 + lbs. (200 kN) at notch 21,000 + lbs. (93.4kN) at blade center |
|
| Spreading Force: | 10,000 to 18,000 lbs. (44.5 - 80.1 kN) |
|
| Weight: | 46 lbs. (20.8 kg.) | |
| Envelope (L x W x H): | 28” x 10” x 12” (71 x 25.4 x 30.5 cm3) |
|
| Opening Distance: | 10 in. (25.4 cm) | |
| PC-100 CONTROLLER UNIT | ||
| Power Input: | 12 Volts DC | |
| Case: | Sealed | |
| Weight: | 5 lbs. (2.3 kg.) | |
| Envelope (L x W x H): | 11” x 4.5” x 7.5” (27.9 x 11.4 x 19 cm3) | |
| PWR3x12 POWER PACK | ||
| Battery Type: | 12 Volts DC - Valve Regulated Lead Acid Battery | |
| Battery Capacity: | 33 AH | |
| Battery Life: | Approximately 500 recharges | |
| Case: | Fully Vented | |
| Recharge Frequency: | At least once a month | |
| Output ports: | 2 high-current, 1 low-current | |
| Weight: | 35 lbs. (13.2 kg.) | |
| Envelope (L x W x H): | 14” x 7” x 15” (35.5 x 17.8 x 38 cm3) | |
| CA-4M POWER CABLE ASSEMBLY | ||
| Cable Length: 13.1 ft. (4m) | ||
| BATTERY CHARGER | ||
| Input 110-220AC. Output 12VDC @ 4amps. | ||
| P-40 POWER PUSHER RAM | ||
| Fully extended length: | 41 in. (104.1 cm) | |
| Fully retracted length: | 23 in. (58.4 cm) | |
| Power stroke length: | 12 in. (30.5 cm) | |
| Secondary extender adjustment: | 6 in. (15.2 cm) | |
| Slot width: | 2.25 in. (5.7 cm) | |
| Weight, including handle: | 36 lbs. | |
| P-25 POWER PUSHER RAM | ||
| Fully extended length: | 27 in. (68.6 cm) | |
| Fully retracted length: | 16 in. (40.6 cm) | |
| Power stroke length: | 5 in. (12.7 cm) | |
| Secondary extender adjustment: | 6 in. (15.2 cm) | |
| Slot width: | 2.25 in. (5.7 cm) | |
| Weight, including handle: | 27 lbs. | |
| EXTENDERS | ||
| MODEL E-24 | ||
| Length: | 24 in.(60.96 cm) | |
| Weight, including handle: | 15 lbs. | |
| MODEL E-48 | ||
| Length: | 48 in. (121.92 cm) | |
| Weight, including handle: | 30 lbs. | |
